Raider 4WD V6-3.7L SOHC (2007)
![background image](/mitsubishi/raider_4wd/v6-3.7l_sohc/Page-718001.png)
Manifold Pressure/Vacuum Sensor: Service and Repair
SENSOR - MAP
REMOVAL
The Manifold Absolute Pressure (MAP) sensor (2) is mounted into the front of the intake manifold.
1. Disconnect electrical connector at sensor.
2. Clean area around MAP sensor.
3. Remove two sensor mounting screws (1).
4. Remove MAP sensor from intake manifold.
5. Check condition of sensor O-ring (2).
INSTALLATION