Raider 4WD V6-3.7L SOHC (2007)
9. Remove the oil pump valve retainers (1) and associated valve (2) and spring one at a time. Mark the combination of components as a group and
tag them as to the location from which they were removed.
10. Remove the T/C regulator valve (1), T/C limit valve (2), and regulator valve (3).
CLEANING
Clean pump and support components with solvent and dry them with compressed air.
INSPECTION
Check condition of the seal rings and thrust washer on the reaction shaft support. The seal rings do not need to be replaced unless cracked, broken, or