Raider 4WD V6-3.7L SOHC (2007)
10. Disconnect cable at lower column bracket and shift lever pin and pull the cable through the dash panel opening into the vehicle.
11. Remove gearshift cable (2) from vehicle.
INSTALLATION
1. Route the transmission end of the gearshift cable (1) through the opening in the dash panel.
2. Seat the cable grommet (2) into the dash panel opening.
3. Snap the cable into the steering column (1) bracket so the retaining ears are engaged and snap the cable eyelet onto the shift lever ball stud.
4. Raise the vehicle.
