Raider 4WD V6-3.7L SOHC (2007)
Windshield Washer Spray Nozzle: Service and Repair
REMOVAL
1. Remove both wiper arms from the wiper pivots.
2. Unlatch and open the hood.
3. Remove the cowl plenum cover/grille panel from over the cowl plenum.
4. From the underside of the cowl plenum cover/grille panel (1), disconnect the washer nozzle hose from the barbed nipple of the washer nozzle (2).
5. From the underside of the cowl plenum cover/grille panel, release the integral latch features of the washer nozzle and push the nozzle out through
the mounting hole toward the top side of the cowl plenum cover/grille panel.
6. Remove the washer nozzle from the top of the cowl plenum cover/grille panel.
INSTALLATION
1. From the top of the cowl plenum cover/grille panel (1), position the nipple end of the washer nozzle (2) through the mounting hole and engage the
anti-rotation tab of the nozzle into the anti-rotation keyway in the mounting hole.
2. Using hand pressure, push firmly and evenly on the top of the washer nozzle until the integral latch features lock into place on the underside of the
cowl plenum cover/grille panel.
3. From the underside of the cowl plenum cover/grille panel, reconnect the washer hose to the barbed nipple of the washer nozzle.