mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Acceleration/Deceleration Sensor > < Transmission Position Switch/Sensor, A/T|Description and Operation
Page 1
background image

ABS Main Relay: Service and Repair

    On models equipped with airbag, disarm airbag as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.

1.

Disconnect ECU electrical connector.

2.

Remove four attaching screws (located under the high floor side panel on the right side of luggage compartment), then remove control unit.

3.

Reverse procedure to install.

Acceleration/Deceleration Sensor > < Transmission Position Switch/Sensor, A/T|Description and Operation