Tredia L4-2.0L SOHC (1985)
sample calculation in the box to the right. Then adjust the tie rod to change the toe by that number.
2.
Hold the tie rod with a wrench while loosening the lock nuts.
3.
Turn the tie rod 1/8 turn for each two degrees the steering wheel is off center.
4.
Re-check toe-in to be sure the specification is not exceeded.
5.
Torque the tie rod lock nuts to 35-45 N-m (26-32 ft-lbs) on Starion and 49-53 N-m (37-39 ft.lbs) on 2WD trucks.
SAMPLE CALCULATION:
Starion steering wheel 5~ off center to right. Measured toe-in: 2 mm.
Maximum toe-in 5 mm. 5 mm - 2 mm = 3 mm available for correction, 3/2 x 1/8 = 3/16 turn to bring the steering wheel to within 2" of being centered.