STRUT ASSEMBLY - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › STRUT ASSEMBLY - Nissan 180SX S13 Workshop Manual
STRUT ASSEMBLY
FRONT SUSPENSION ~— Coil Spring and Strut Assembly
Removal Strut upper portion @ Remove strut assembly fixing bolts and nuts (to hoodledge). @ Do not remove piston rod lock nut on vehicle. @ Put matchmarks on strut lower bracket and camber adjust- ing pin.
SFASSIA Disassembly
1. Set strut assembly on vise with Tool, then loosen piston rod lock nut. @ Do not remove piston rod lock nut. bar
SFA134A4
2. Compress spring with a Tool so that strut mounting insula- tor can be turned by hand.
SFAT35A
3. Remove piston rod lock nut.
SFAI3Z0A Inspection
STRUT ASSEMBLY
@ Check for smooth operation through a full stroke, both compression and extension. @ Check for oi! leakage occuring on welded or gland packing portion. @ Check piston rod for cracks, deformation or other damage. Replace if necessary.
FA-15
Parts & tools for this job For Nissan 180SX
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: Nissan 180SX front shock absorbers
As an Amazon Associate we earn from qualifying purchases.