PRE-DELIVERY INSPECTION ITEMS - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › PRE-DELIVERY INSPECTION ITEMS - Nissan 180SX S13 Workshop Manual
PRE-DELIVERY INSPECTION ITEMS
PRE-DELIVERY INSPECTION ITEMS
Shown below are Pre-delivery Inspection Items required for the new vehicle. It is recommended that necessary items other than those listed here be added, paying due regard to the conditions in each country. Perform applicable items on each model. Consult text of this section for specifications.
UNDER HOOD — engine off
UNDER BODY
[__| Manual transmission/transaxle, transfer and differ- [ _] Radiator coolant level and coolant hose connec- ential gear oil level tions for leaks {__] Brake and fuel lines and oil/fluid reservoirs for [___] Battery fluid level, specific gravity and conditions of battery terminals leaks (__] Tighten bolts and nuts of steering linkage and [_] Drive belts tension gear box, suspension, propeller shafts and drive (__] Fuel filter for water or dusts, and fuel lines and shafts connections for leaks (__] Tighten rear body bolts and nuts (Models with [_] Engine oil level and oil leaks [__] Clutch and brake reservoir fluid level and fluid wooden bed only) lines for leaks
ROAD TEST
[J Windshield and rear window washer and headlamp
[_] Clutch operation cleaner reservoir fluid level [___] Power steering reservoir fluid level and hose con- [_] Parking brake operation (_]Service brake operation nections for leaks [__] Automatic transmission/transaxle shift timing and
ON INSIDE AND OUTSIDE
kickdown [__] Steering contro! and returnability [__] Remove front spring/strut spacer (If applicable) [__] Operation of all instruments, gauges, lights and [__] Engine performance [] Squeaks and rattles , : accessories [__] Operation of horn(s), wiper and washer
ENGINE OPERATING AND HOT.
Steering lock for operation [__]Adjust idle mixture and speed (and ignition Check air conditioner for gas leaks Front and rear seats, and seat belts for operation timing* 1) UUOU [_] Automatic transmission/transaxie fluid level All moldings, trims and fittings for fit and align- [__]Engine idling and stop knob operation (Diesel only) , ment All windows fer operation and alignment
FINAL INSPECTION
Hood, trunk lid, door panels for fit and alignment [J Install necessary parts (outside mirror, wheel cov- Latches, keys and locks for operation UWOUU ers, seat belts, mat, carpet or mud flaps) Weatherstrips for adhesion and fit [__] Inspect for interior and exterior metal and paint [-_] Headlamp aiming [_] Tighten wheel nuts (Inc. inner nuts if applicable) damage [__] Check for spare tire, jack, tools (wheel chock), (__] Tire pressure (Inc. spare tire) [__] Check front wheels for toe-in and literature [__] Install clock/valtmeter/room lamp fuse (If applica- [|__| Wash, clean interior and exterior ble) *4: Not required on models with a direct ignition sys- [__] Install deodorizing filter to air purifier (if applicable) [__] Remove wiper blade protectors (if applicable) tem
MA-3
Parts & tools for this job For Nissan 180SX
- PARTOil filterSearch: Nissan 180SX oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Nissan 180SX engine oil
As an Amazon Associate we earn from qualifying purchases.