200SX L4-1998cc 2.0L DOHC MFI (SR20DE) (1995)
3.
Featheredge the paint around the repair using an orbital sander with a 180 grit disc. Wipe with a clean dry rag and blow off with air.
4.
Mix Flexible Parts Repair Material according to the manufacturer instructions and apply to the repair area with a squeegee, building it up higher
than the undamaged area. Allow it to cure for 20-30 minutes at 60-80°F.
5.
After curing, sand with 180 grit disc followed by a 240 grit disc.
6.
Fill sand scratches and pinholes with Flexible Parts Putty. Allow at least 15 minutes to dry. Sand with a 320 grit disc.