200SX L4-1998cc 2.0L DOHC MFI (SR20DE) (1995)
Technical Service Bulletin # 95093
Date: 950920
Keyless Entry - Battery Replacement/Reprogram
Classification: EL95-011
Reference: NTB95-093
Date: September 20, 1995
KEYLESS ENTRY REMOTE SWITCH ASSEMBLY:
BATTERY REPLACEMENT AND RE-PROGRAMMING PROCEDURE
APPLIED VEHICLES:
1995 Maxima GLE, GXE (option), SE (option) (A32)
1995 300ZX, all (Z32)
1995 240SX SE (S14)
1995 Sentra GLE (B14) 1995 200SX SE-R (B14)
SERVICE INFORMATION
If a Nissan remote switch assembly (remote controller) fails to operate, or operates intermittently, use the following procedures to bring it back into
proper operation.
CLAIM INFORMATION
Remote controller replacement due to customer abuse, purse/pocket damage and/or loss is not covered by Warranty. The replacement of the remote
controller battery is also not covered by Warranty. These are "customer pay" situations.
Service Procedure
SERVICE PROCEDURE
Remote Controller Battery Check and Replacement
Figure 1
1.
Remove the remote controller battery lid (Figure 1). For Maxima, 300ZX and 240SX only: Use a suitable tool, a quarter works best.
CAUTION
Do not use a screwdriver or a knife. These tools may damage the cover.