BR - Brake System: PARKING BRAKE - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › BR - Brake System: PARKING BRAKE - Nissan 200SX S12 Workshop Manual
BR - Brake System: PARKING BRAKE
PARKING BRAKE
Adjustment. Removal. | If necessary, separate cable from parking brake STROKE fever by breaking pin, Pull lever with specified emount of force. © Check lever stroke and smooth operation. Front cable, clevis pin and cotter pin are available a8 service parts, Pulling force: 39EN (20g, 44 1H)
sao sangre Adjust lever stroke. ®
Inspection.
1. Check control lever for wear or other damage. Replace if necessary.
2. Check wires for discontinuity or deterioration, Replace if necessary.
3. Check warning lamp and switch. Replace if necessary.
4. Check parts at each connecting portion and, if found deformed or damaged, replace. Bonaie
WARNING LAMP SWITCH
warning lamp switch plate so ° Bend parking breke that brake warning light comes on when ratchet at ' parking brake lever is putled one or two notches ‘and goes out when fully released,
BR-18
Parts & tools for this job For Nissan 200SX
- PARTBrake padsSearch: Nissan 200SX brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.