LIFTING AND TOWING POINTS - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › LIFTING AND TOWING POINTS - Nissan 200SX S12 Workshop Manual
LIFTING AND TOWING POINTS
LIFTING AND TOWING POINTS
Towing
TOWING WITH FOUR WHEELS ON
CAUTION:
GROUND OR TOWING WITH FRONT
All applicable State or Provincial (in Canada) ¢
on ground) laws and local laws regarding the towing operation must be obeyed, It is necessary to use proper towing equipment © to avoid possible damage to the vehicle during ‘a towing operation.
WHEELS RAISED (With rear wheels
Towing is in accordance with Towing Proce-
dure Manual at dealer. Always observe posted speed limits. Before towing, make sure that the trans- © and power train are in mission, steering system good order. If any unit is damaged, a dolly Sores Automatic transmission models must be used or the vehicle must be towed
When towing as illustrated, observe the following
with rear wheels off tha ground, When towing with the front wheels on the © restricted towing speeds and distances. ground: keny/h (MPH) Speed ‘Tum the ignition key to the ”OFF” position Below 50 (30) ‘and secure the steering wheel in a straight- Less than 65 (40) km (miles) Distance ahead position with ® rope or similar device, if the speed or distance must be greater, remove Never placa the ignition kay in the “LOCK”
position. This will result in damage to the
shaft beforehand to prevent damat the propeller stooring tock mechanism, to the transmission. When towing with the rear wheels on the »
TOWING POINT
ground, relaase the perking brake and mova the FRONT gearshift lever to neutral {”"N"” position).
REAR
We recommend that vehicle be towed with the driving (rear) wheels off the ground as illustrated. saise7 Use only towing hooks. Otherwise, the vehicle ‘© body will ba damaged. Do not apply force to the towing hook in @ ® tateral direction. Keep the tow rope or similar device straight ahead, in line with the vahici GI-18
Parts & tools for this job For Nissan 200SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 200SX
As an Amazon Associate we earn from qualifying purchases.