300ZX V6-2960cc SOHC Turbo (VG30ET) (1984)
FIGURE 9
26.
Install the new water-cooled turbocharger assembly (P/N 14411-01P00) to the exhaust manifold using a new turbocharger inlet gasket (P/N
14415-V5300) and new lock plates (P/N 14495-V5300). Bend the lock plate tabs into place after tightening (Figure 9).
27.
Install the O2 sensor adaptor (nut) and the O2 sensor on the turbocharger assembly (Figure 9).
Part D - Turbocharger Installation Assembly - Vehicle
FIGURE 10
FIGURE 11
28.
Place the turbocharger/exhaust manifold assembly in the vehicle, but do not attach it to the cylinder head.