300ZX V6-2960cc SOHC Turbo (VG30ET) (1984)
FIGURE 13
36.
Install the collector bracket (shield on the exhaust balance tube) (Figure 13).
37.
Install a new lower heat shield (P/N 74767-02P00). Discard the remaining shields in the kit.
38.
Install the power steering rack shield.
39.
Install the three studs into the turbocharger exhaust housing.
40.
Install the front exhaust tube assembly.
41.
Connect the O2 sensor connector and secure it in the connector bracket.
42.
Install the heat shield bracket to the brake master cylinder.
FIGURE 14
43.
Install the new water hoses (P/N 14056-01P02 and 14056-01P13) (Figure 14).