nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

All Technical Service Bulletins for Fuel Gauge Sender:|TS85075 > < Campaign - Fuel Sending Unit Extended Coverage
Page 2
background image

2.

Mount the adapter box under the luggage floor mat, as shown in Figure 1. Install the ground wire under the mounting screw as shown.

3.

Disconnect the blue 3 pin connectors of the fuel pump and the white 4 pin connectors of the fuel sending unit.

4.

Connect the blue connectors of the adapter to the blue connectors of the fuel pump, as shown in Figure 2.

5.

Connect the white connectors of the adapter to the white connectors of the sending unit, as shown in Figure 2.

B.

Analog Fuel Sending Unit Installation

1.

Replace the fuel sending unit with the new unit supplied in the kit (P/N 25060-17P71). Install the new O-ring when replacing sending unit.

Warranty Information

CS

PNC

CT

OP CODE

FLAT RATE

9Y

P5052

99

P50520

0.5/hr.

Submit claims using the Datanet NC transaction or S-1-S claim.

GOODWILL REFUNDS

Customers may be eligible for a refund for fuel sending unit repairs. This reimbursement program is administered by NMC. All inquiries should be
referred to the Regional Consumer Relations Department.

All Technical Service Bulletins for Fuel Gauge Sender:|TS85075 > < Campaign - Fuel Sending Unit Extended Coverage