300ZX Coupe V6-2960cc DOHC (VG30DE) (1994)
5.
Unsnap the plastic retainers along the rear edge of the top lid by pulling it away from the storage assembly.
6.
Remove the cracked/damaged handles by cutting the 4 pins above the push clips.
7.
Install the new handles on the top lid and secure them by inserting the pins into the push clips.
8.
Reverse steps 2 through 5 above, and ensure that the tightening torque of the 6 mm screws inside the handles does not exceed 8 inch pounds.
PARTS INFORMATION
WARRANTY INFORMATION