300ZX Coupe V6-2960cc DOHC (VG30DE) (1994)
Fig. 4 Rear Toe-in Adjustment.
LESS FOUR WHEEL STEERING
1. Measure toe-in following equipment manufacturer's instructions.
2. Adjust toe-in by turning adjusting pin. Each graduation of adjusting pin equals 0.059 inch, Fig. 6.
3. Torque adjusting bolt to 51-65 ft. lbs.
WITH FOUR WHEEL STEERING
Rear toe-in can be adjusted by adjusting power cylinder lower links.
1. Measure toe-in for each wheel following equipment manufacturer's instructions.
2. Adjust toe in by adjusting lengths of power cylinder lower links.
3. After adjustment is complete, ensure both lower links are same length.