Cowl: Service and Repair
- Make
- Nissan and Datsun
- Model
- 350Z
- Engine
- V6-3.5L (VQ35)
- Year
- 2003
- Section
- Cowl › Service and Repair
Body and FrameService and Repair
/Page-2089001.png)
Cowl: Service and Repair
Removal and Installation
REMOVAL
1. Remove clips of hood ledge cover (RH/LH).
2. Remove both right/left wiper arms. Refer to "Removal and Installation for Front Wiper Arms, Adjustment for Wiper Arms Stop Location"
3. Remove cowl top seal rubber.
4. Remove clips of cowl top cover (right) and remove cowl top cover (right).
5. Remove clips, cap and screws and remove cowl top cover (left).
6. Remove washer hose from cowl top cover.
INSTALLATION
Install in the reverse order of removal.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2003 Nissan 350Z 3.5L
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Nissan touch up paint
- PARTPanel clip assortmentSearch: Nissan panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.