350Z V6-3.5L (VQ35) (2003)
Mirrors: Service and Repair
Door Mirror
Removal and Installation
Removal and Installation
REMOVAL
1. Remove door finisher. Refer to Doors, Hood and Trunk.
2. Remove corner cover inner.
3. Remove door mirror harness connector.
4. Remove door mirror mounting nuts and remove door mirror assembly.
INSTALLATION
Install in the reverse order of removal.
Disassembly and Assembly
DISASSEMBLY
1. Place the mirror body with mirror glass facing upward.
2. Put strip of protective tape on mirror body.
3. As shown in the figure insert a small slotted screwdriver into the recess between mirror base (mirror holder) and mirror holder bracket and push up