Altima V6-3.5L (VQ35) (2003)
2. Re-attach the transmission control cable to the slotted transmission control arm. "Loosely assemble" (do not tighten yet) the lock nut (see Figure 3).
Note:
The hole on the transmission control arm is slotted (see Figures 2 and 3). This will allow for adjustment of the transmission control cable.
3.
Perform the following steps:
^
Push up on the transmission control cable (see arrows in Figure 4). This will remove all the play.
^
Lightly hold finger pressure on the cable end to keep it in that position (see Figure 4).
^
While maintaining this light upward pressure on the cable end, tighten the lock nut to 8-10 ft-lbs (11-14 Nm, 1.1-1.5 kg-m) - see Figure 4.
4.
Verify the gear shift selector lever operates freely.
5.
Confirm the engine cranks in both Park (P) and Neutral (N) position.
CLAIMS INFORMATION