Altima 2.5 SL L4-2.5L (QR25DE) (2002)
^
Remove the Torque Converter and Lower Bell Housing Bolts before removing the engine. It's easier to do this before the engine is out of the vehicle.
See Figure H8.
A/T Revolution Sensor Wire Harness Connectors (Altima and Sentra)
^
Make sure you mark the A/T Revolution Sensor Wire Harness Connectors for proper re-installation (see Figure H9). If these connectors are "mixed
up", improper transmission shifting can occur.
TOD Rear Main Harness Support Bracket (Altima and Sentra)
^
Remove the bolt that secures the Top Rear Main Harness Support Bracket to the engine before engine removal (see Figure H10).
Wire Harness Support Bracket (Altima ONLY)