Cube L4-1.8L (MR18DE) (2010)
1. Fit the rear bumper cover (LH) in the rear bumper fascia without creating clearance and fix with rivets.
2. Fit the rear bumper cover (RH) in the rear bumper fascia without creating clearance and fix with rivets.
3. Install the rear license bracket, license lamp assembly, and screw grommets.
4. Install the tail harness.
5. Install the rear side marker lamp assembly (LH, RH).
Disassembly And Assembly Of Rear Panel (LWR) Assembly
REAR BUMPER
Disassembly and Assembly of Rear Panel (LWR) Assembly
REMOVAL
1. Remove the rivets to remove the rear bumper cover (Side A LH, RH).
INSTALLATION
[Krom]
Install in the reverse order of removal.
[Krom]