Cube L4-1.8L (MR18DE) (2010)
1. Remove luggage side lower finisher.
2. Remove rear seatbelt shoulder anchor bolt. See: Restraint Systems/Seat Belt Systems/Seat Belt Buckle/Service and Repair/Rear Seat
Belt/Exploded View.
3. Insert a remover tool between luggage side upper finisher and body panel to disengage clips, pawls and metal clips and then remove luggage side
upper finisher.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
When installing, check that clips, pawls and metal clips are securely fitted into panel holes on body, and then press them in.