D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
Brake Pedal Assy: Adjustments
Brake Pedal Adjustment
MEASUREMENT
Under a force of 490 N (110 lb), with engine running, check brake pedal height from floor panel.
Dimension H: Free height for vehicles with manual transaxle is 209-219 mm (8.23-8.62 inch); automatic transaxle is 212-222 mm (8.35-8.74
inch)
Dimension D: Depressed height is 120 mm (4.72 inch)
Dimensions C1, C2: Clearance between pedal stopper and threaded end of stop lamp switch/Automatic Speed Control Device (ASCD) brake
switch is 0.3-1.0 mm (0.012-0.039 inch)
Dimension A: Pedal free play (at pedal pad) is 4.0-12.0 mm (0.16-0.47 inch)
Dimension A: Pedal free play (at clevis) is 1.0-3.0 mm (0.039-0.118 inch)
Fig. 8 Adjusting Input Rod
ADJUSTMENT
If necessary, adjust brake pedal free height as follows:
1. Loosen lock nut and adjust pedal free height by turning brake booster input rod. Then tighten lock nut. Make sure that the tip of input rod stays
inside.