Frontier XE King Cab 4WD L4-2.4L (KA24DE) (1998)
Headlamp: Adjustments
Aiming Adjustment
When performing headlamp aiming adjustment, use an aiming machine, aiming wall screen or headlamp tester. Aimers should be in good repair,
calibrated and operated in accordance with respective operation manuals.
If any aimer is not available, aiming adjustment can be done as follows:
For details, refer to the regulations in your own country.
a. Keep all tires inflated to correct pressures.
b. Place vehicle and tester on one and same flat surface.
c. See that there is no-load in vehicle (coolant, engine oil, filled up to correct level and full fuel tank) other than the driver (or equivalent weight
placed in driver's position)
Aiming Adjustment
AIMING ADJUSTMENT MARK
When using a mechanical aimer, adjust adapter legs to the data marked on the headlamps.
Adjustment value for mechanical aimer
Low Beam
LOW BEAM
1. Turn Headlamp low beam on
2. Use a #2 cross-recessed screwdriver to adjust the aim of the lamp.
^
Cover the opposite lamp.