nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Trouble Diagnosis (For USA)|Page 9397 > < Trouble Diagnosis (For USA)|Page 9395
Page 2
background image

Low Beam

If the vehicle front body has been repaired and/or the headlamp assembly has been replaced, check aiming. Use the aiming chart shown in the figure.

^  Upper edge and left edge of high intensity zone should be within the range shown at left. Adjust headlamps accordingly.
^  Dotted lines in illustration show center of headlamp.

"H": Horizontal center line of headlamps
"WL": Distance between each Headlamp center

Trouble Diagnosis (For USA)|Page 9397 > < Trouble Diagnosis (For USA)|Page 9395