nissan Workshop Repair Guides

Nissan and Datsun Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 9
background image

1. Turn OFF the TCU using C-III plus.

^ Perform steps 1-15 of the Turning ON the TCU During PDI procedure.

NOTE:

>

Instead of selecting "ON" in step 11, select "OFF".

>

In step 15, confirm the current status is displayed as "Off".

>

After step 15, select End.

2. Select SAVE VIN DATA.

3. Select Start.

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Communications Control Module > Component Information > Technical Service Bulletins > Telematics System - Service Information > Page 15

< PREV PAGE NEXT PAGE >