Murano AWD V6-3.5L (VQ35) (2003)
![background image](/nissan/murano_awd/v6-3.5l_(vq35)/Page-1618002.png)
^
In order to prevent damage to final drive side oil seal, first fit to protector onto oil seal before inserting drive shaft. Slide drive shaft into slide joint
tap with a hammer to install securely.
CAUTION: Be sure to make sure circular clip is securely fastened.
Disassembly and Assembly
Disassembly and Assembly
DISASSEMBLY
Final Drive Side
1. Press shaft in a vise.
2. Remove boot band.
CAUTION: When retaining shaft in a vice, always use copper or aluminum plates between vise and shaft.
3. Put matching marks on slide joint assembly and shaft before separating slide joint assembly.