Murano AWD V6-3.5L (VQ35) (2003)
Windshield Washer Reservoir: Service and Repair
Removal and Installation of Washer Tank
REMOVAL
1. Remove the washer tank inlet mounting screw.
2. Remove fender protector (front).
3. Remove front bumper.
4. Disconnect washer pump connector.
5. Remove washer tank mounting bolt.
6. Remove washer tube, and remove washer tank from the vehicle.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION: After installation, add water up to the upper level of the washer tank inlet, and check for water leaks.
Washer tank mounting bolt
With Tightening Torque: : 3.8 - 5.1 Nm (0.39 - 0.52 kg-m, 34 - 45 in-lb)