Murano AWD V6-3.5L (VQ35DE) (2009)
5. Remove the corner piece assembly fixing screws, then remove the corner piece assembly.
6. Remove the rear door inside seal
7. Remove the sealing screen with a cutter tool.
NOTE:
Cut the butyl-tape so that some parts of the butyl-tape do not remain on the sealing screen, if the sealing screen is reused.
8. Operate the power window switch to raise/lower the door window until the glass mounting bolts can be seen.
9. Remove the glass mounting bolts.
Arrow indicates Bolt
10. Remove the rear door glass from inside or outside of door panel.
11. Remove the rear door glass run and rear door sash (lower).
INSTALLATION
Install in the reverse order of removal.