Murano AWD V6-3.5L (VQ35DE) (2009)
^ Turn OFF all vehicle electrical loads such as exterior lights, interior lights, HVAC, blower, rear defogger, audio, NAVI, seat heater, steering wheel
heater, etc.
IMPORTANT
5. Make sure the engine cooling fan(s) are not running.
If the cooling fans are running:
a. Turn the ignition OFF.
b. Wait for the engine to cool.
C. Turn the ignition ON (with engine OFF).
d. Make sure the engine cooling fans are not running.
6. Open / start ASIST on the C-III computer.
7. Select CONSULT Utilities, CONSULT-III, and Wait for the "Detecting VI/MI in progress" message to clear.
8. Select the detected VI from the list (see Figure 1).
9. Select Connect (see Figure 1).
10. Wait for the "Checking the firmware version" message to clear (picture not shown).