Murano AWD V6-3.5L (VQ35DE) (2009)
Figure 1
3. Replace the actuator-to-manifold gasket with the one from the Parts Information section of this bulletin.
4. Thread in the actuator bolts by hand until they are not quite finger-tight.
5a. Slide the actuator up as far as you can on the bolts and hold it there.
5b. While holding the actuator up, tighten the actuator bolts in the order shown.
TORQUE: 8.4 N.m (0.86 kg-m, 74 in-lb).
Figure 2
7. Re-assemble the vehicle in reverse order of disassembly.
Disclaimer