Murano AWD V6-3.5L (VQ35DE) (2009)
Stabilizer Bar: Service and Repair
Rear Stabilizer
Exploded View
REAR STABILIZER
Exploded View
Refer to See: Diagrams/Diagram Information and Instructions for symbols in the figure.
Removal And Installation
REAR STABILIZER
Removal and Installation
REMOVAL
1. Remove tire with power tool.
2. Remove stabilizer connecting rod mount bracket.
3. Remove stabilizer connecting rod.
CAUTION:
Apply a matching mark to identify the installation position.
4. Remove mounting bolts on stabilizer clamp and remove stabilizer bar with power tool.
INSTALLATION
Note the following, and install in the reverse order of removal.
-
Check the matching mark when installing.