Murano FWD V6-3.5L (VQ35DE) (2006)
![background image](/nissan/murano_fwd/v6-3.5l_(vq35de)/Page-1277002.png)
^
Check boot for cracks or other damage, and also for grease leakage.
^
If a trouble is found, disassemble drive shaft, and then replace with new one.
INSTALLATION
CAUTION: Be sure to replace the new differential side oil seal every removal of drive shaft.
^
Install in the reverse order of removal.
CAUTION: Refer to component parts location and do not reuse non-reusable parts.
^
In order to prevent damage to transaxle side oil seal, first fit a protector (suitable tool) onto oil seal before inserting drive shaft. Slide drive shaft
into slide joint and tap with a hammer to install securely.
CAUTION: Be sure to make sure circular clip is securely fastened.
Right Side
Removal and Installation (Right Side)
REMOVAL