Quest V6-3.5L (VQ35DE) (2009)
REMOVAL AND INSTALLATION OF OUTBOARD SEAT BELT RETRACTOR
Removal
1. Remove the upper anchor bolt cover.
2. Remove the D-ring anchor bolt cover and D-ring anchor bolt.
3. Remove the seat belt lower anchor.
4. Remove the upper luggage area trim. Refer to See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair.
5. Remove the seat belt retractor anchor bolt and retractor assembly.
Installation
Installation is in the reverse order of removal.
REMOVAL AND INSTALLATION OF CENTER SEAT BELT RETRACTOR
Removal
1. Remove the upper luggage area trim. Refer to See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair.
2. Lower the rear portion of the headliner.
3. Remove the seat belt retractor anchor bolts and retractor assembly.
Installation
Installation is in the reverse order of removal.
REMOVAL AND INSTALLATION OF SEAT BELT BUCKLE
Removal
1. Rotate third row seat assembly rearward to expose underside.
2. Release seat cushion trim cover locking strip.
3. Remove the seat belt buckle anchor bolt and seat belt buckle.
Installation
Installation is in the reverse order of removal.
Seat belt buckle anchor bolt : 49 N.m (5.0 kg-m, 36 ft-lb)