Quest V6-3.5L (VQ35DE) (2009)
![background image](/nissan/quest/v6-3.5l_(vq35de)/Page-911002.png)
-
Check that the projecting part inside the upper seat and the flange part of bracket are attached as shown.
-
Check that the projection part outside the upper seat directs to vehicle front.
-
Position the hollow of the rubber seat with the groove part of rear lower link to install.
-
Install coil spring with the side of two paint markers directing to lower side.
-
After installing the rear lower link and coil spring, check the wheel alignment and adjust if necessary. Refer to See: Alignment/Service and
Repair/Rear Suspension.