Quest Minivan XE V6-2960cc 3.0L SOHC MFI (VG30E) (1998)
When refinishing the door bottom, submit a Primary Operation (PO) line using the following claims coding as shown.
Technical Service Bulletin # 94-015
Date: 940208
Paint - Contamination Identification and Repair
Classification:
BF94-003
Reference:
NTB94-O15
Date:
February 8, 1994
PAINT CONTAMINATION IDENTIFICATION AND REPAIR
This bulletin supersedes NTB93-058 / BF93-014 & NTB91-090 / BF91-023
APPLIED VEHICLE(S):
ALL
SERVICE INFORMATION
The following procedures and materials have been found effective in removing iron particles, water or chemical spots, scratches and/or swirl marks
which have not penetrated the clear coat/color coat of painted vehicle surfaces.
NOTE:
The updated repair procedures discussed in this Service Bulletin can be applied to all types of Nissan clear coat materials, including the new Cross
Link clear coat (NCLC)/hard clear coat.
*NOTE:
Measure the paint thickness before and after abrasive cleaning. If abrasive repair is not successful on the first panel tested, it must be tried on each
affected panel (hood, roof, trunk etc.,) to determine which panel(s) must be re-clear coated or re-color/clear coated and which may be repaired by
abrasive means.
Finish Kare Product Distributors:
1726 Floradale Ave., El Monte, CA 91733 (213) 686-0462