Rogue 2WD L4-2.5L (QR25DE) (2008)
<---: Engine front
b. Insert seal cutter (SST) between oil pan (upper) and oil pan (lower).
CAUTION: Be careful not to damage the mating surface.
INSTALLATION
1. Install oil pan (lower) with the following procedure:
a. Use a scraper to remove old liquid gasket from mating surfaces.
^
Also remove old liquid gasket from mating surface of oil pan (upper).
^
Remove old liquid gasket from the bolt holes and threads.
CAUTION: Never scratch or damage the mating surface when cleaning off liquid gasket.
b. Apply a continuous bead of liquid gasket with a tube presser (commercial service tool) as shown in the figure.
<---: Engine front
a: 4.0 - 5.0 mm (0.157 - 0.197 in)
Use Genuine RTV Silicone Sealant or equivalent.
CAUTION: Attaching should be done within 5 minutes after liquid gasket application.