Rogue 2WD L4-2.5L (QR25DE) (2008)
/Page-498003.png)
c. Tighten bolts in numerical order as shown in the figure.
<---: Engine front
2. Install oil pan drain plug.
^
Refer to the figure of components for installation direction of washer.
3. Install in the reverse order of removal after this step.
NOTE: Pour engine oil at least 30 minutes after oil pan is installed.
Inspection
INSPECTION AFTER INSTALLATION
1. Check engine oil level and adjust engine oil. Refer to LU-5, "Inspection". See: Engine Oil/Testing and Inspection
2. Start engine, and check there is no leaks of engine oil.
3. Stop engine and wait for 10 minutes.
4. Check engine oil level again. Refer to LU-5, "Inspection". See: Engine Oil/Testing and Inspection
Inspection
INSPECTION AFTER INSTALLATION
1. Check engine oil level and adjust engine oil. Refer to LU-5, "Inspection". See: Engine Oil/Testing and Inspection
2. Start engine, and check there is no leaks of engine oil.
3. Stop engine and wait for 10 minutes.
4. Check engine oil level again. Refer to LU-5, "Inspection". See: Engine Oil/Testing and Inspection
