nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Air Bag Systems|Service and Repair > < Air Bag Systems|Specifications|Page 11984
Page 1
background image

Air Bag: Service Precautions

NOTE: * Before disposing of air bag module, seat belt pre-tensioner or vehicle equipped with such systems, deploy the systems. If such systems have

already been deployed due to an accident, dispose of them as indicated in "DISPOSING OF AIR BAG MODULE AND SEAT BELT
PRE-TENSIONER".

When deploying the air bag module or seat belt pre-tensioner, always use the Special Service Tool; Deployment tool [KV99106400

(J38381)].

When deploying the air bag module or seat belt pre-tensioner, stand at least 5 m (16 ft) away from the deployment component.
When deploying air bag module or seat belt pre-tensioner, a fairly loud noise is made, followed by smoke being released. The smoke is not

poisonous, however, be careful not to inhale smoke since it irritates the throat and can cause choking.

Always deploy one air bag module at a time.
Due to heat, leave air bag module unattended for more than 30 minutes after deployment. Also leave seat belt pre-tensioner unattended for

more than 10 minutes after deployment.

Be sure to wear gloves when handling a deployed air bag module or seat belt pre-tensioner.
Never apply water to the deployed air bag module or seat belt pre-tensioner.
Wash your hands clean after finishing work.
Place the vehicle outdoors with an open space of at least 6 m (20 ft) on all sides when deploying air bag module or seat belt pre-tensioner

while mounted in vehicle.

Use a voltmeter to make sure the vehicle battery is fully charged.
Do not dispose of the air bag module or seat belt pre-tensioner undeployed.

DISPOSING OF AIR BAG MODULE AND SEAT BELT PRE-TENSIONER

Deployed air bag modules and seat belt pre-tensioners are very hot.

Before disposing of air bag modules or seat belt pre-tensioners, wait at  least 30 minutes or 10 minutes, respectively.

Seal them in a plastic bag before disposal.

CAUTION: Never apply water to a deployed air bag module or seat belt pre-tensioner.

Be sure to  wear gloves when handling a deployed air bag module or seat belt pre-tensioner.
No poisonous smoke is produced upon air bag module deployment.  However, be careful not to inhale smoke since it irritates  throat and
can cause choking.
Do not attempt to disassemble air bag module or seat belt pre-tensioner.
Air bag modules and seat belt pre-tensioners cannot be reused.
Wash your hands clean after finishing work.

Air Bag Systems|Service and Repair > < Air Bag Systems|Specifications|Page 11984