Sentra Sedan L4-1597cc 16L SOHC (E16S) 1986 Seat Trim Non-Warrantable Examples Tech Notes
2.
Remove the four retaining screws, then pull the seat back up and out.
3.
Remove high-mount stop light and rear speakers, if equipped.
4.
Remove rear parcel shelf.
5.
Remove front seat belt upper anchor bolts. (2 dr.)
6.
Remove quarter glass by removing mounting screws shown below. (2 dr.) This will allow access to the quarter panel finisher.
7.
Remove quarter glass weatherstrip. (2 dr.)
8.
Pull back top half of lower quarter panel trim. (2 dr.)
9.
Remove rear pillar finisher (coat hanger mounts must be removed first). [2 dr.]
10.
Locate the drilling point on the rear pillar finishers. The hole location is marked in the actual trim piece and is illustrated below.