Stanza L4-2389cc 2.4L SOHC MFI (KA24E) (1991)
PARTS INFORMATION
The following 3M products (or their equivalent) should be obtained from your local body shop supply.
3M PART
PART DESCRIPTION
NUMBER
APPLICATION
Flexible Parts Repair Manual
05900
Both types
Flexible Parts Putty
05903
Polyurethane bumpers
Flexible Parts Coating
05905
Both types
Polyolefin Adhesion Promoter
05907
Polypropylene bumpers
solvent (general purpose)
--
To remove silicones,
tar or grease.
Fiberglass cloth
--
To repair holes up to
3" in diameter.
Sanding discs for rotary
--
36 grit
sander
180 grit
240 grit 320 grit
Polyurethane Bumper Fascia Repair
If extensive reinforcing or patching from the back is required use the following procedure.
1.
Scuff the backside with grade 180 abrasives.
2.
Cut a glass cloth patch to cover repair area.
3.
Mix a quantity of Flexible Parts Repair Material. Lay glass cloth on a clean surface. Use a squeegee to force the Flexible Parts Repair Material into
the glass cloth.
4.
Apply glass cloth patch to backside of repair area.
5.
Apply additional Flexible Parts Repair Material over surface of glass cloth patch.
FASCIA REPAIR
1.
Clean the repair area with soap and water. Remove grease and tar with solvent. Avoid solvent contact with plastic base material - temporary
swelling can occur.