Xterra SE 2WD V6-3.3L (VG33E) (2002)
-
Temporarily install crankshaft pulley bolt on crankshaft so the crankshaft can be rotated.
15. Loosen timing belt tensioner nut, rotate tensioner, then remove timing belt.
Installation
CAUTION: Do not bend or twist timing belt.
After removing timing belt, do not turn crankshaft and camshaft separately because valves will strike piston heads.
Make sure that timing belt, camshaft sprocket, crankshaft sprocket and belt tensioner are clean and free from oil and water.
Installation should be carried out when engine is cold.
Timing Belt & Related Components