Xterra SE 2WD V6-3.3L (VG33E) (2002)
Installation
1. Confirm that No. 1 piston is set at TDC on its compression stroke.
2. Install tensioner and tensioner spring.
Once stud is removed, apply locking sealant to threads of stud on cylinder block side before installing.
3. Turn tensioner fully outward with hexagon wrench, and temporarily tighten lock nut.
4. Set timing belt when engine is cold.
a. Align white lines on timing belt with punchmarks on camshaft sprockets and crankshaft sprocket.
b. Point arrow on timing belt toward front belt cover.
5. Install the remaining parts in the reverse order of removal.