Xterra SE 2WD V6-3.3L (VG33E) (2002)
B.
Position the harness on the driver side air bag module.
^
Be careful to push only on the harness connector until it is fully seated not on the harness locking clip to connect it (see Figure 3).
C.
After securing the connector, push down on the locking clip.
^
Then, pull and wiggle the connectors to ensure they are fully connected and locked to the driver air bag module (see Figure 4).
6.
Use CONSULT II to clear the DTC codes.
7.
Confirm the incident has been resolved.
PARTS INFORMATION
CLAIMS INFORMATION