oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Coolant Reservoir > < Surge Tank Pipe Replacement - Inlet|Page 3564
Page 6
background image

12. Connect the heater inlet hose to the water crossover.

13. Connect the inlet radiator hose (2) to the water housing crossover.
14. Connect the right exhaust manifold. Refer to Exhaust Manifold Replacement See: Exhaust System/Exhaust Manifold/Service and Repair.
15. Install the throttle body. Refer to Throttle Body Assembly Replacement See: Powertrain Management/Fuel Delivery and Air Induction/Throttle

Body/Service and Repair.

16. Install the air cleaner inlet duct. Refer to Air Cleaner Inlet Duct Replacement See: Engine/Tune-up and Engine Performance Checks/Air Cleaner

Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair.

17. Fill the cooling system. Refer to Cooling System Draining and Filling See: Service and Repair.
18. Inspect for leaks.

Coolant Reservoir > < Surge Tank Pipe Replacement - Inlet|Page 3564