Aurora V6-214 3.5L VIN H SFI (2001)
1. Install and fully seat the CMP sensor (1) into the cylinder head.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the CMP sensor mounting bolt (2).
Tighten
Tighten the bolt to 9 N.m (80 lb in).
3. Connect the electrical connector to the CMP sensor.
4. Lower the coolant recovery tank onto the mounting studs.
5. Install the 2 mounting nuts to retain the coolant recovery tank.
Tighten
Tighten the nuts to 1 N.m (9 lb in).