Aurora V6-214 3.5L VIN H SFI (2001)
4. Use a socket (3) in order to prevent the strut shaft from turning. Remove the strut shaft retaining nut.
5. Install the J34013-38 in order to help guide the strut shaft out of the assembly.
6. Loosen the compressor screw while guiding the strut shaft out of the assembly. Continue loosening the compressor screw until the strut and the
spring may be removed.
Installation Procedure
1. Install the strut in the J34013-B with the J34013-20 clamped on the strut shaft (1) in the strut compressor.
Important:
-
Ensure that the flat on the upper spring seat faces out from the centerline of the vehicle. When you mount the spring seat in the strut compressor,
ensure that the spring seat faces in the same direction as the steering knuckle mounting flange.
-
If the bearing had been removed from the upper spring seat, install the bearing into the upper spring seat in the same orientation as it had been.
Also, install the bearing in the spring seat before attaching to the strut mount.