Intrigue V6-3.8L VIN K (1998)
Garnish Molding Replacement: Windshield Pillar - Removal Procedure
1. Reposition the weatherstrip.
2. Disengage the retaining tabs to remove the molding.
3. Disengage the clips to remove the molding.
INSTALLATION PROCEDURE
Garnish Molding Replacement: Windshield Pillar - Installation Procedure
1. Engage the retaining tabs to install the molding.
2. Engage the clips to install the molding.
Lower Center Pillar Trim
REMOVAL PROCEDURE
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover