Intrigue V6-3.8L VIN K (1998)
10. Clean any rust or foreign material from the mating surface of the rotor and the hub.
11. Install the brake rotor on the hub, one or two bolt positions from the rotor's original position. Repeat Steps 5 through 8.
-
If the TIR still exceeds 0.080 mm (0.003 in), refinish or replace the rotor as necessary.
For rotor refinishing, refer to Refinishing Brake Rotors.
13. Remove the wheel nuts securing the rotor to the hub.
14. Install the tire and wheel. Refer to Wheel Installation in Tires and Wheels.
15. Lower the vehicle.